Section 54.16.280. Energy conservation plan—Financing authorized for energy conservation projects in structures or equipment—Limitations.

Any district is hereby authorized, within limits established by the Constitution of the state of Washington, to assist the owners of structures or equipment in financing the acquisition and installation of materials and equipment, for compensation or otherwise, for the conservation or more efficient use of energy in such structures or equipment pursuant to an energy conservation plan adopted by the district if the cost per unit of energy saved or produced by the use of such materials and equipment is less than the cost per unit of energy produced by the next least costly new energy resource which the district could acquire to meet future demand. Any financing authorized under this chapter shall only be used for conservation purposes in existing structures, and such financing shall not be used for any purpose which results in a conversion from one energy source to another. For the purposes of this section, "conservation purposes in existing structures" may include projects to allow a district's customers to generate all or a portion of their own electricity through the on-site installation of a distributed electricity generation system that uses as its fuel solar, wind, geothermal, or hydropower, or other renewable resource that is available on-site and not from a commercial source. Such projects shall not be considered "a conversion from one energy source to another" which is limited to the change or substitution of one commercial energy supplier for another commercial energy supplier. Except where otherwise authorized, such assistance shall be limited to:

(1) Providing an inspection of the structure or equipment, either directly or through one or more inspectors under contract, to determine and inform the owner of the estimated cost of purchasing and installing conservation materials and equipment for which financial assistance will be approved and the estimated life cycle savings in energy costs that are likely to result from the installation of such materials or equipment;

(2) Providing a list of businesses who sell and install such materials and equipment within or in close proximity to the service area of the district, each of which businesses shall have requested to be included and shall have the ability to provide the products in a workmanlike manner and to utilize such materials in accordance with the prevailing national standard;

(3) Arranging to have approved conservation materials and equipment installed by a private contractor whose bid is acceptable to the owner of the residential structure and verifying such installation;

(4) Arranging or providing financing for the purchase and installation of approved conservation materials and equipment. Such materials and equipment shall be purchased from a private business and shall be installed by a private business or the owner; and

(5) Pay back shall be in the form of incremental additions to the utility bill, billed either together with use charge or separately. Loans shall not exceed two hundred forty months in length.

[ 2010 1st sp.s. c 4 § 1; 2002 c 276 § 3; 1989 c 268 § 2; 1979 ex.s. c 239 § 3.]

NOTES:

Findings—Intent—2002 c 276: See note following RCW 35.92.360.

Legislative declaration—Effective date—Contingency—1979 ex.s. c 239: See RCW 35.92.355 and note following RCW 35.92.360.

2010 1st sp.s. c 4 § 1; 2002 c 276 § 3; 1989 c 268 § 2; 1979 ex.s. c 239 § 3.